Hioki – PW3335
| Analiza motor | Nu |
| Aplicatii | Automotive, R&D |
| Banda frecventa | <1MHz |
| Familie | PW3330 |
| Numar canale | <4 |
| Parteneri | Hioki |
| Precizie | 0.05%-0.1% |
| Software dedicat | Da |
Detalii produs Hioki – PW3335
Greater accuracy for standby power
The PW3335 Power Meter delivers a range configuration that lets you measure extremely low power levels with a margin to spare. Accuracy can be set from 10 μA and up for current, and 0 W and up for effective power. Perfect for measurements according to IEC62301 and other standards.
Support for Crest Factor 6
When an AC adapter or switching power supply operates with no load, the crest factor of the current waveform increases. The PW3335 can measure waveforms that exceed the range of watt meters that support crest factor 3.
In addition, although the power factor is low during no-load operation, the PW3335 is affected very little by power factor and can therefore achieve accurate measurements.
Power Factor Effect of 0.1% or Less, Even at Low Power Factors
A no-load loss test is one indicator for evaluating energy conservation for transformers and motors.
The PW3335 are affected very little by power factor, at ±0.1% f.s. or less, allowing active power to be measured with a high level of accuracy at low power factors.
